Matt Varnish 1360
For supplementary coating of offset inks if matt effects should be achieved.
In favour of the velvety matt effect, sliding properties and rub resistance of dried prints are slightly lower.
Properties:
| Drying: | absorbing and oxidative |
| Piling property: | good |
| Tack: | normal, wet in wet applicable |
| Matt effect: | very good |
| Blocking resistance: | above 80 °C |
| Rub resistance: | limited |
| Own colouration: | low |
| Tendency for yellowing: | low |
| Viskosity: | ca. 5 Pa.s/20 °C |
| Application: | wet in wet and wet on dry |
| Suitable for: | glänzend gestr. Papiere und Kartons |
Can be applied on full surface (without water) or for spot varnishing. Normal drying time; by adding 2 % dryer 452 or 5 % EPPO Drier 2001 for spot varnishing with water, drying can be accelerated.
Application
Can be printed on all offset inks. Pile height and powder application must be in relation to the coating film thickness and the printing substrate.
Printing additives:
- Drier 452
- Thinner 455
- Printing gel 348
This technical instruction sheet is designed for your information and reference. It is based on and conforms to our current knowledge. However as actual application is affected by many factors over which we have no control, we are not liable for printing failures.