Waterfit K 1748
Fountain Solution for Offset Printing
| Field of application: | Sheet fed offset, |
| Admixture: | 2−3 % with isopropanol 3−4 % without isopropanol |
| Characteristics: | This fountain solution has especially been developed for the usage in alcohol damping systems with ceramic rollers. The combination of the advantages of high plate protection, good oxidative drying and extremely stable ink/water balance also apply when printing IPA free. Further advantages in IPA free printing such as increased colour brilliance and contrast (e.g. when using FM-screens) also apply with this fountain solution. This product minimizes the problem of ink into the damping system and contains special active substances against streaking. |
| pH – value: | 4,6−4,7 in the concentrate, 4,8−5,3 in dilution depending on water quality and admixture. |
| Conductivity: | 16−17 mS in the concentrate, ca. 370 µS/1 % admixture in fountain solution |
| Colour: | blue |
| Density: | 1,04 kg/l |
| Ignition point: | > 63 °C |
| Marks: | keep away from frost |
| Storage: | 0−35 °C, protect from direct sun light. Use within 6 months after delivery |
| Packaging: | 5, 10, 20, 25, 200, 600, 1000 kg |
| Not: | Use only plastic pumps when refilling the product. |
This technical instruction sheet is designed for your information and reference. It is based on and conforms to our current knowledge. However as actual application is affected by many factors over which we have no control, we are not liable for printing failures.